$ dmesg -l err
[ 166.420801] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19
[ 166.420803] PM: Device 00:0a failed to resume: error -19
[ 206.278581] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19
[ 206.278583] PM: Device 00:0a failed to restore: error -19
有些網站告訴你要去檢查你的硬體
要去找 Device 00:0a 是什麼東西
不過在我的電腦上我卻沒有這個硬體
$ sudo lspci -vt
密碼：
-[0000:00]-+-00.0 Intel Corporation Mobile 4 Series Chipset Memory Controller Hub
+-02.0 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller
+-02.1 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller
+-03.0 Intel Corporation Mobile 4 Series Chipset MEI Controller
+-19.0 Intel Corporation 82567LF Gigabit Network Connection
+-1a.0 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4
+-1a.1 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5
+-1a.2 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6
+-1a.7 Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2
+-1b.0 Intel Corporation 82801I (ICH9 Family) HD Audio Controller
+-1c.0-[02]--
+-1c.1-[03]----00.0 Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller
+-1c.3-[05-0c]--
+-1c.4-[0d-14]--
+-1d.0 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1
+-1e.0-[15-18]--+-00.0 Ricoh Co Ltd RL5c476 II
| \-00.1 Ricoh Co Ltd R5C832 IEEE 1394 Controller
+-1f.0 Intel Corporation ICH9M LPC Interface Controller
+-1f.2 Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
\-1f.3 Intel Corporation 82801I (ICH9 Family) SMBus Controller於是又找了一些資料，發現只要停用tpm_tis這個module就可以了，不太曉得休眠跟tpm_tis有什麼關係
不過只要停用這個module就沒有上面那些錯誤訊息了。
$ sudo vi /etc/modprobe.d/blacklist.conf
內容如下blacklist tpm_tis
存檔後我重開機再執行休眠
結果這次出現了下面的錯誤訊息
Sep 4 10:39:26 camserver kernel: Do you have a strange power saving mode enabled?
Sep 4 10:39:26 camserver kernel: Uhhuh. NMI received for unknown reason 29 on CPU 0.
Sep 4 10:39:26 camserver kernel: Dazed and confused, but trying to continue
於是我又找了些資料來修正這個錯誤訊息$ sudo vi /etc/default/grub
修改GRUB_CMDLINE_LINUX_DEFAULT="quiet"
變成GRUB_CMDLINE_LINUX_DEFAULT="quiet resume=/dev/disk/by-uuid/34c112bf-cbe0-4f2c-b324-048a62114537 nmi_watchdog=0 nohpet"
關於resume的部份那串uuid是我的swap分割區你可以執行這個指令，來得知你的swap分割區的uuid
$ sudo blkid
/dev/sda6: UUID="34c112bf-cbe0-4f2c-b324-048a62114537" TYPE="swap"
這樣子做完以後我的休眠就不再有錯誤訊息了參考來源：
沒有留言 :
張貼留言